Handlebars
All products are made IN SHOP in Southern California. 
Support local businesses and buy AMERICAN MADE! We offer a 20% military discount to active service people.
All handlebars are now available knurled and drilled for internal wiring. Please contact us for current availability.
We DO NOT have any information on cables.
Vindikta handlebars are professionally powder coated gloss black or available in raw steel. Upon ordering, let us know your preferred finish and your height preference (if applicable), if you would prefer dimpled or non-dimpled bars. All handlebars are made in our shop in Southern California. Most of the 1″ handlebars are available and ready to ship, however, due to fluctuating demand, there may be a 2-3 week build time. We will consult you at the time of order if product is not in stock.
Custom orders are not refundable. Please be sure to double check your order before placing it. Vindikta will not be held liable for any measuring errors or misinformation provided to us by the customer. Please read CUSTOM WORK before contacting us for a custom order.
Vindikta 1″ Sierra Handlebars
Price: $125 for black powdercoat
Height: 12 inches
Width: 30″
Base: 8″
Pull Back: 4″
These bars are usually in stock and ready to ship. For custom alterations to the stock measurements or if you would like this bar in chrome, please allow 2-3 weeks.
Vindikta
Vindikta 1″ Devil Dog Handlebars
Price: $149 for black powdercoat
Height: 12, 14 inches
Width: 27″, 28″
Base: 9″
Pull Back: 6″
These bars are constructed out of 1.25″ tubing, and are available in 1.5″ tubing for an additional $50 fee. All of the 1.25″ handlebars are built to order and due to the options offered and there will be a minimum 2-3 week build time. Any modifications other than the height will be considered a custom order. Please read the disclaimer under CUSTOM WORK before placing your order.
Vindikta Wild Cat Handlebars
Price: $325 for black powdercoat $400 for Chrome, also available in raw steel for $275
Sizes: heights of 12, 14, 16 to 18 inches (image is of 14″)
Details of handlebar pictured (some measurements may vary depending on size ordered)
Width: 35″
Pull Back: 9″
These bars are constructed out of 1.25″ tubing, and are available in 1.5″ tubing for an additional $50 fee. All of the 1.25″ handlebars are built to order and due to the options offered and there will be a minimum 2-3 week build time. Any modifications other than the height will be considered a custom order. Please read the disclaimer under CUSTOM WORK before placing your order.
Vindikta
Vindikta
Vindikta
Vindikta
Vindikta
Vindikta
Vindikta
Below is an example of a modified Wild Cat bar that was built for a Harley Street Bob. The narrow base and drag bar like width, makes this a great looking and comfortable bar for narrow and mid glide bikes. Give us a call and we can build a pair for you or modify it to meet your specific needs.
Vindikta Bagger Z-Bar Handlebars
Price: $325 for black powdercoat $385 for Chrome, also available in raw steel for $295
Sizes: heights of 10, 12, 14, or 16 inches (image is of 14″)
Details of handlebar pictured (some measurements may vary depending on size ordered)
Width: 35″
Pull Back: 9″
These bars are built to be used with Bat Wing fairings and are pre-drilled for internal wiring. They are also notched to work with the Throttle by Wire system found on 2008 and later HD touring models but are also available without TBW
These bars are built to order, so please allow 2-3 weeks for delivery.
Vindikta Bagger Handlebars
Price: $265 for black powdercoat $325 for Chrome, also available in raw steel
Sizes: heights of 10, 12, 14, or 16 inches (image is of 14″)
Details of handlebar pictured (some measurements may vary depending on size ordered)
Width: 35″
Pull Back: 9″
These bars are built to be used with Bat Wing fairings
The bars are pre-drilled for internal wiring and are notched to work with the Throttle by Wire system found on 2008 and later touring models
This bar is built to order, so please allow 2-3 weeks for delivery.
Vindikta Devil Pup Handlebars
Price: $295 for black powdercoat $375 for Chrome, also available in raw steel for $250
Sizes: heights of 10, 12, 14, 16, or 18 inches
Base: 10″
width: 28″ (pictured 12” bars) Width will vary slightly
These are a more narrow form of our popular Devil Dog style handlebars that look great on narrow glide front end bikes.
This bar is built to order, so please allow 3-4 weeks for delivery. Custom alterations to the stock measurements are available, such as width, pull back, etc.
Vindikta Devil Dog Handlebars
Price: $295 for black powdercoat $375 for Chrome, also available in raw steel for $250
Sizes: heights of 10, 12, 14, 16, 18 or 20 inches
Details of handlebar pictured (some measurements may vary depending on size ordered)
Width: 35″
Pull Back: 7″
Base Outside to Outside: 12″
Height: 18″
Center Step Down: 5.5″
Springer Step Down 7″
These bars are constructed out of 1.25″ tubing, and are available in 1.5″ tubing for an additional $50 fee. All of the 1.25″ handlebars are built to order and due to the options offered and there will be a minimum 2-3 week build time. Any modifications other than the height will be considered a custom order. Please read the disclaimer under CUSTOM WORK before placing your order.
Vindikta
Vindikta
Vindikta
Vindikta Meathook Handlebars
Price: $375 for black powdercoat $450 for Chrome, also available in raw steel for $325
Sizes: heights of 10, 12, 14, 16, 18 or 20 inches
Details of handlebar pictured (some measurements may vary depending on size ordered)
Width: 35″
Pull Back: 7″
Base Outside to Outside: 12″
Height: 18″
Center Step Down: 5.5″
Springer Step Down 7″
These bars are constructed out of 1.25″ tubing, and are available in 1.5″ tubing for an additional $50 fee. All of the 1.25″ handlebars are built to order and due to the options offered and there will be a minimum 2-3 week build time. Any modifications other than the height will be considered a custom order. Please read the disclaimer under CUSTOM WORK before placing your order.
A closeup.
Vindikta Sweeper Style Handlebars
Price: $79.99
Height: 12 inches
Pullback: 5 1/2 inches
Width: 31 inches
Base is 11 inches with a 5.5″ center
Vindikta T bars
Price: $150 for black powdercoat $225 for Chrome, also available in raw steel for $119
Height: 11″
Width : 25″
Tapped thru for 1/2×13″
Standard HD 3.5″ spacing
This bar is built to order, so please allow 3-4 weeks for delivery. Custom alterations to the stock measurements are available, such as width, pull back, etc.
A closeup.
A closeup.
A closeup.
Vindikta Sierra Handlebars
Price: raw $225, $250 for black powdercoat $275 for Chrome
Sizes: heights of 8, 10, !2, and 14 inches
Springer application available
This bar is built to order, so please allow 3-4 weeks for delivery.
1.25″ Mini “Z” Bars
Base width: 12″
Height : 5″
width: 25″
Pull back 4″
Price: $150 for black powdercoat $225 for Chrome, also available in raw steel for $119
Vindikta
Vindikta Narrow Apes Handlebars
Sizes: heights of 10, 12, 14, 16, or 18 inches
$79.99
Pullback: 6 inches
Width: 34 - 38 inches depending on height
6.5” center
These are our Ultra Narrow Apes but just modified in the center to accept a slightly larger riser combination. They are still about as tight as you can get.
Vindikta Ultra Narrow Apes Handlebars
Sizes: heights of 14 and 16 inches
Price: $79.99 for all heights knurled, dimpled, and drilled
Pullback: 6 inches
Width: 32 inches depending on height
5” center
Vindikta Drag Style Handlebars
Price: $34.99
Pullback: 4 inches
Width: 28 inches
7″ center
