Vindikta

Look for the Vindikta Krew at Born Free 5! We will be enjoying the day in Silverado on June 29th, supporting our fellow riders. The event is at Oak Canyon Ranch from 10am to 5pm. For more info check out the official Born Free site!

Follow @vindikta

We will be there to enjoy the show, will you? Vendors, bikes, music and more! 104 S Robson Mesa, AZ 85210
(480) 644-8191

Need more information? Visit the AZ Bike Week site!

Follow @vindikta

We just wanted to let our customers know that our motorcycle bars are also available for Springer models.

Here are our 1.5″ Wildcat bars in a Springer version:

We appreciate all of the great feedback on our new releases. Summer is coming and it’s time to ride!

Follow @vindikta

Come out & support the pre 1970 hot rods & customs at the 5th Annual Hippy Killer Hoedown Motorcycle Show! The cost is just $10. Ride on out to The Wild West Arena, 32150 Grand Ave. Winchester, CA We will not be vending but all of us will be there to just enjoy the show.

Need more info? Check out their event website!

Follow @vindikta

It’s our latest bar for our 2013 line, the 1.5″ Talon!

---

Vindikta 1.5″ Talon Handlebars
Price: $350 for black powdercoat $375 for Chrome
Sizes: heights of 12, 14, 16, 18 or 20 inches (image is of 14″)
The top of this 14″ bar is at 20” as there is a 6” height difference from the top to the final height.
Details of handlebar pictured (some measurements may vary depending on size ordered)
Base: 12.5″
Width: 35″
Pull Back: 9″

 Please read the disclaimer under GUIDE before placing your order.

Follow @vindikta

We are excited to share our newest creations now available for your Harley Davidson touring bike, the Avenger and the Redeemer handlebars.

---

Vindikta 1.5″ Avenger Handlebars
Price: $350 for black powdercoat   $375 for Chrome
Sizes: heights of 10, 12, 14, 16, 18 or 20 inches (image is of 18″)
Details of handlebar pictured (some measurements may vary depending on size ordered)
Base: 12.5″
Width: 36″
Pull Back: 9″

These 1.5″ bars are built to be used on a Road Glide to compliment the sharp bends of the fairing, but will fit most other Harley models. The bars are pre-drilled for internal wiring and are notched to work with the Throttle by Wire system found on 2008 and later touring models.  Please read the disclaimer under GUIDE before placing your order.

---

Vindikta 1.5″ Redeemer Handlebars
Price: $350 for black powdercoat   $375 for Chrome
Sizes: heights of 12, 14, 16, 18 or 20 inches (image is of 18″)
Details of handlebar pictured (some measurements may vary depending on size ordered)
Base: 12.5″
Width: 36″
Pull Back: 9″

These 1.5″ bars are built to be used on a Street Glide with specialized angled bends for ease of reach and lumbar comfort on a touring bike. The bars are pre-drilled for internal wiring and are notched to work with the Throttle by Wire system found on 2008 and later touring models.  Please read the disclaimer under GUIDE before placing your order.

Follow @vindikta

1.5″ T-bars now available. Heights 10″ thru 18″, the ones pictured are 16″. They are drilled for internal wiring with a Pull Back of 3″ and 30″ wide. These can be set up for throttle by wire if you are running them on a late model Road KIng or Road Glide.

Powder Coat is $225 and Chrome $250, now found in our Handlebar section of our site!

Follow @vindikta

JANUARY 5, 2013
ANAHEIM, CA
Anaheim Convention Center (Hall A)
800 West Katella Ave. - Anaheim, CA 92802
Show Hours: 10am-8pm
Admission Adults: $20.00
$5 Discount For All ACTIVE MILITARY
- Must Show Military ID At Time Of Purchase “Can ONLY Be Used At Box Office”
Admission Kids: (6-12) $10.00 5 Yrs & Younger-Free

We will have a booth here launching our new products for 2013, so come by and say hello!

Follow @vindikta

A new crop of photos has been added to the Gallery of past work on customer’s rides. Our motorcycle Gallery showcases a selection of Vindikta handlebar designs we’ve done for our bike customers from around the globe. If you’ve bought a handlebar from us, email us a photo!

Follow @vindikta

EL CAMINO HISTORIC MOTORCYCLE EVENT MOVES TO IRWINDALE RACEWAY

Due to much needed earthquake retrofitting and renovations, a large portion of the parking lot used at El Camino College is unavailable for use for this year’s El Camino event. This construction would result in having to turn away 75 regular swap meet vendors, and would once again leave the event without space for the 30 to 50 new vendors that inquire each year wanting to participate in the event.
Now, the event will be held at the Irwindale Raceway, located at 500 Speedway Dr. Irwindale, CA. 91706.
The vendor spaces are a bit larger with plenty of room for all regular vendors, new vendors and for future growth.
The bike show registration fee and spectator admission will stay the same. There will be a $5.00 parking fee per vehicle and FREE dedicated ride-in parking for motorcycles.
We will be attending the event tomorrow, but will not have a vendor booth. Hope you can make it out to it as well!

Follow @vindikta